Technical Center

Parameters Needed for Vortex Flowmeter Selection

Hot:13122014-02-10 19:29:17 From: FTD AUTOMATION INSTRUMENTS

 Parameters Needed for Vortex Flowmeter Selection

 

We need following technical parameters to choose the proper type FTLU Vortex flow meter, so please providing the following parameters to us :

(1) Fluid

(2) Outer & Inner diameter of pipeline (mm)

(3) State of measured media: Liquid, Gas, Steam

(4) Scale flowrate unit (kg/ h, t/h, m3/ h, Nm3/ h)

a) Under operating condition

b) Under standard condition

(5) Normal flowrate for the Vortex Flowmeter

(6) Min flowrate, Max flowrate (specify the state of flowrate for gas medium)

a) Under operating condition

b) Under standard condition

(7) Operating pressure (MPa)

a) Absolute pressure

b) Gauge pressure

(8) Fluid temperature () : Max, Min, Normal

(9) Fluid density (kg/ m3) (specify the state of flowrate for gas medium)

a) Operating Status

b) Standard Status

(10) Viscosity (Pas)

(11) Gas component

Volume percentage (for more than two kinds of mixed gas)

(12) Explosion proof

a) Intrinsical safe

b) Flame proof

(13) Pipe flange

a) According to standard, code is for flange standard

b) Flange drawing provided by customers

(14) Output signal

4~20mA DC, pulse output, RS-485, Hart, ModBus

(15) Power supply

24VDC, 3.6V lithium battery, 24VDC 3.6V lithium battery double power supply

Notice:

(1)~(8), (11)~ (15) must be provided for water & steam measurement.

(1)~ (15) are provided for common gas

(1), (2), (4) ~(10), (12)~(15) are provided for common solution & light oil.

Please provide detailed value for parameters. Range value does not work.

 

Link to FTLU Vortex Flow meter

 

Edit by FTD Automation Instruments( www.ftdinstruments.com)

FTD Automation Instruments Limited - Field Instruments © 2013 •   Support by 外贸网站建设
LiveZilla Live Chat Software